Topic: How wrong am I (Read 905 times)

strandman · « **Reply #15 on:** October 08, 2012, 01:33:15 PM »

Two things;

I always create a level spot for the hanger, bash the rock with your hammer and then scrape away the junk with the pick.

Use a torque wrench a couple of time sto get the feel for how much is enough torque... THEN use a wrench

eyebolter · « **Reply #16 on:** October 08, 2012, 06:57:32 PM »

Put in three SS eyebolts today, no torque wrench needed. You do need to clean the hole out really well before putting the glue in. Sweet climbing conditions today on the slopers, 48 and overcast.

Admin Al · « **Reply #17 on:** October 08, 2012, 07:45:46 PM »

Quote from: strandman on October 08, 2012, 01:33:15 PM

Use a torque wrench a couple of time sto get the feel for how much is enough torque... THEN use a wrench

use a small wrench, not a big one...

sneoh · « **Reply #18 on:** October 08, 2012, 10:15:05 PM »

So, is it about 15 ft-lb for Petzl expansion bolts (probably overgeneralizing here)?

tradmanclimbz · « **Reply #19 on:** October 09, 2012, 07:10:00 AM »

Reasd the manufacturers specs. Rawl Power wedge which I do not like BTW as I have had a few loosen up is 28#
Hilti Kwick Bolt 3 which I like a lot is 20 lbs.

strandman · « **Reply #20 on:** October 09, 2012, 01:34:36 PM »

What i meant about torque wrenches was- to get a FEEL for how much is needed. It's pretty easy to over-do things and snap a bolt or get a spinner. 20-25 ft lbs is not much force

NEClimbs.com forum

News:

Author Topic: How wrong am I (Read 905 times)

strandman

Re: How wrong am I

eyebolter

Re: How wrong am I

Admin Al

Re: How wrong am I

sneoh

Re: How wrong am I

tradmanclimbz

Re: How wrong am I

strandman

Re: How wrong am I