NEClimbs.com forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Reading the forum on your cell phone? There's an easier way. We've enabled a Tapatalk app that makes browsing the forum a whole lot easier. Check it out in the iPhone or Android store if you don't own it already.

Pages: [1]   Go Down

Author Topic: Replaced bolts on the VMC Direct/Direct  (Read 1003 times)

SA

  • NEClimbs Senior Member
  • ****
  • Offline Offline
  • Posts: 333
Replaced bolts on the VMC Direct/Direct
« on: October 10, 2013, 09:36:04 PM »

Just want to give kudos to whoever put the new 3/8 inch bolts on the 3rd belay of the Direct/Direct. I was up there today in surprisingly mild conditions, and it was nice to see secure anchors, rather than depending on those old pitons driven in somewhat rotten rock. I was also surprised to see the new bolt, just before the overlap, on the 4th pitch, replacing my old 1/4
bolt.

Glad to see the 3rd pitch is still the same, ( and hasn't fallen down yet).
Logged

strandman

  • NEClimbs God
  • *****
  • Offline Offline
  • Posts: 4473
Re: Replaced bolts on the VMC Direct/Direct
« Reply #1 on: October 11, 2013, 12:05:32 PM »

What kind of person would place such pitons ?   :D
Logged

strandman

  • NEClimbs God
  • *****
  • Offline Offline
  • Posts: 4473
Re: Replaced bolts on the VMC Direct/Direct
« Reply #2 on: October 21, 2013, 10:23:57 AM »

Just saw some recent postings about  P2 & P3 being 11B !!..um...
Logged

kenreville

  • NEClimbs God
  • *****
  • Offline Offline
  • Posts: 440
Re: Replaced bolts on the VMC Direct/Direct
« Reply #3 on: October 21, 2013, 02:58:58 PM »

Nope. Not even close.
Logged

SA

  • NEClimbs Senior Member
  • ****
  • Offline Offline
  • Posts: 333
Re: Replaced bolts on the VMC Direct/Direct
« Reply #4 on: October 24, 2013, 08:17:54 AM »

John,

As you know, pitch 2 can be pretty tough depending on finger size. My fat fingers barely get into the under-cling---definitely 10+ for me. My son's skinny fingers can get real deep into the crack--much easier for him.

Pitch 3 is still 10+--not in the 11 grade. It hasn't changed in 40+ years, and since I just got up it clean, a few weeks ago, it can't be 5.11---I don't climb that hard at 67.

Hope your feeling better.
Logged

strandman

  • NEClimbs God
  • *****
  • Offline Offline
  • Posts: 4473
Re: Replaced bolts on the VMC Direct/Direct
« Reply #5 on: October 24, 2013, 10:59:57 AM »

DD has always been my standard for NH 10+
Logged

kenreville

  • NEClimbs God
  • *****
  • Offline Offline
  • Posts: 440
Re: Replaced bolts on the VMC Direct/Direct
« Reply #6 on: October 24, 2013, 10:05:36 PM »

That's about right.
Logged

tradmanclimbz

  • NEClimbs God
  • *****
  • Offline Offline
  • Posts: 3793
  • Nick Goldsmith
Re: Replaced bolts on the VMC Direct/Direct
« Reply #7 on: October 25, 2013, 06:29:36 AM »

And most folks know that 10+ is some kind of 11  with sport rateings ;) Is it harder than Duet Direct?
Logged

strandman

  • NEClimbs God
  • *****
  • Offline Offline
  • Posts: 4473
Re: Replaced bolts on the VMC Direct/Direct
« Reply #8 on: October 25, 2013, 12:55:01 PM »

Diff for sure..but both 10C/+   Of course Camber used to be 10+ and Budapest as well (now 11B and 11D)
Logged

kenreville

  • NEClimbs God
  • *****
  • Offline Offline
  • Posts: 440
Re: Replaced bolts on the VMC Direct/Direct
« Reply #9 on: October 25, 2013, 08:51:00 PM »

Which are just about right as well.
Logged

strandman

  • NEClimbs God
  • *****
  • Offline Offline
  • Posts: 4473
Re: Replaced bolts on the VMC Direct/Direct
« Reply #10 on: October 30, 2013, 05:40:36 PM »

What about the pins ???
Logged

kenreville

  • NEClimbs God
  • *****
  • Offline Offline
  • Posts: 440
Re: Replaced bolts on the VMC Direct/Direct
« Reply #11 on: October 30, 2013, 09:12:38 PM »

Screw the pins. If ya can't fish in a nut or two, then run the bitch out.

Otherwise, go home. And grow some nuts.  ;D
Logged
Pages: [1]   Go Up
 

Page created in 0.466 seconds with 23 queries.