M Willard - Time-Space Continuum

[steve4464]

Anybody have photos/beta for this? I've done Hugos a couple times and the description for this looks like it would fun( more fun if find it  😜) and maybe a couple more pieces of pro are on it ...

[snowleopard]

Some pix are posted on Mountain Project under the Crawford Notch Mt. Willard section.

Also it is written up in J. Sykes new guide book.

If you find the start, route finding is straight forward as the 4 pitches take pretty much a straight line up
The 4th pitch on Mt.Project is describes a variation that diagonals right.  The real 4th pitch is the straight
up direct line to the anchors. The Mt.Project description/photo showing the right diagonal as the regular line is
actually a variation and also the top of a different route.

[steve4464]

Sweet! Thanks!

[JohnR]

Steve, Jon Sykes new guide "The Notches" covers Time-Space Continuum, with pic, p23-24. John

[steve4464]

Thanks John! I hope to get back up there before long and do it.

[slink]

Steve it's a good route. Just head right from Hugo's and you will come to a small flat section of trail. Look for a bolt on the nose of the corner 20 feet up. Go straight up for four pitches. Bring tri cams and a light rack.

[rbirk]

Lots of good info here too:

https://www.mountainproject.com/v/time-space-continuum-aka-time-traveler-revisted/109769531

[smartpig]

The Notches: A Climbers Guide to the Western White Mountains, by Jon Sykes, and much of the photography by me, can be purchased at IME (and other climbing shops) or directly here:
 
https://www.eaglecliffpub.com/


Sent from my iPhone using Tapatalk

[xcrag_corex]

Hey Steve,
Did you end up getting on this? Was rapping off of Hugo's today and found some booty down low on Time Space.
Let me know and I'll get it back to you.

[steve4464]

Hey Jeremy!!!

I greatly appreciate the thought , and while the free gear would be awesome, it's not mine. I'm away for a couple of weeks now 😕

[snowleopard]

Just curious.....
Did it appear that someone bailed or perhaps gear was left behind
because it was stuck?

[xcrag_corex]

It was a QuickDraw on a bolt... seems like someone just forgot to grab it...